2013 GT Calafia complete bike.

Nov 20, 2012

Written by Bart de Jong

Read 16624 times

The Calafia is the top of the range complete bike in GT's street section. Fully equipped it comes with the following parts:
-Frame: 2013 GT Street Design S/S, 100% Cr-Mo, DT Gussett, MID BB , Seat Stay Mounted U-Brake, Full Removable Brake Hardware and Rotor Guides, integrated 1-1/8" H/T
-Fork: GT Dirt/Street Design, 100% Cr-Mo, 1-1/8" Steerer With Internal Thread in Top Cap, 31.8- 28.6mm Tapered O.D. Blades, 3/8" axle

-Chain: KMC Z410
-Crank: GT Heat Treated Cr-Mo tubular 2 Piece Welded Drive Side Cr-Mo 175mm Arms, 19mm x 8T Spline, 25T GT CNC AL 6.35M CNC Chain Wheel
-Bottom Bracket: MID Sealed Bearing
-Pedals: GT Low Profile Large Size Platform Design, PP Material, Boran Axle

-Cog Set: 9T One Piece Driver
-Rims: Alienation Deviant, Double Wall, 32 Hole F, Alienation 440 Double Wall, 36 Hole R
-Tires: GT Pool Street Design 2.3" F/R
-Hubs: GT Alloy Mohawk Design, Low Flange 32F Hole Hub Body Front, Sealed Bearings With 3/8" Cr-Mo Axle
-Rear Hub: GT Alloy Mohawk Design, Low Flange 32F Hole Hub Body Front, Sealed Bearings With 3/8" Hollow Cr-Mo Axle With Cr-Mo Thread In Hex Bolts
-Spokes: 14G
-Nipples: Alloy
-Grips: GT Wings Logo 130mm Single Compound
-Headset: 1-1/8" Integrated

-Brake Levers: Tektro XL-510 Alloy, Hinged Clamp, 2-Finger Compact Lever Design
-Handlebar: GT 100% Cr-Mo, 690mm Width, 210mm Rise, 11 Degree Sweep, 3 Degree Tip, Taper Cross Bar
-Stem: GT 100% Cold Forged 1-1/8" Machined GT Logo On Front Cap, 50mm Ext

-Saddle: GT Street Design Unifed Padded Saddle w/ Post
-Seat Post: Integrated With Saddle, 135mm
-Seat Clamp: Alloy, single bolt

Colors: Black
Extras: One Pair GT 35mm OD x 98mm Cold Forged Steel Pegs

www.gtbicycles.com