Renthal enters pedal market with the Revo-F

Feb 20, 2024

Written by Bart de Jong

Read 658 times

Flat Pedal lovers have another choice with Renthal introducing the CNC machined Revo-F pedal with fully adjustable pins. The Renthal Revo-F is packed with unique features to deliver the ultimate Ride-Tuned on trail performance, tuneable grip levels, ease of maintenance and bomb-proof durability. As a key contact point, the level of performance of the pedal and rider choice needed to align with our renowned handlebar, stem and grip range. Obviously making the pedal as durable as possible was a massive driver behind our design rationale.

External Specifications
-Forged and CNC machined, 6061 aluminium body

-Fully concave platform in two axis
-Large parallelogram body profile. 104mm x 100mm.
-The pedal features 10 pins per side, with tuneable pin height. With a combination of the supplied short and long pins and 1mm washers, the pin height is adjustable in 1mm increments, from 2.5mm to 5.5mm.

Internal Specifications
• Unique axle system, with patent pending servicing technology. The patent pending technology uses the axle to remove and install the Igus bush, without the need for specialist tools.
• Only tools needed:
– 6mm hex-key
– 8mm hex-key
– Standard 8mm socket
– Torque wrench
– Mallet
• High-grade chromoly axle.
• Full-width axle, with three outboard cartridge bearings. Two smaller and one larger bearing.
• Extra wide, inboard Igus bushing
• Inboard, full-contact wiper seal and an outboard o-ring seal on the end cap.