* 48 Spoke Alienation alloy wheels w/ 14mm axles * Cassette rear hub w/ 10T Driver.
-Frame Chromoly down tube, mid BB, welded Oryg tabs, dual cable routing
-Fork Full chromoly w/ 1 1/4" OD legs, 1 1/8" threadless steerer, U-brake mounts, 6mm dropouts
-Headset FSA 1 1/8" threadless
-Handlebar Hi-ten steel 2-piece 25" wide x 7.75" rise
-Grips DB Team 'no-flange' w/ plastic bar end caps
-Stem 4 bolt alloy front load
-Brakes Tektro 907 U-brakes w/ SST DC Amplifier, soft compound pads
-Brake Levers Tektro 2 finger
-Cranks 175mm tubular chromoly 3-piece w/ 8-spline BB axle
-Sprocket 28t steel
-BB Loose ball w/ 8-spline 19mm axle
-Pedals DB Sound alloy w/ traction pins, chromoly axle
-Rims 48h Alienation PBR w/ brushed sidewalls
-Hubs (F)48h aluminum shell w/ 14mm axle (R)48h cassette w/ 1-piece driver, loose ball
-Chain KMC Z410 1/2 x 1/8
-Freewheel 10t cassette
-Tires DB Cellblock 20x2.1
-Spokes Black 14g
-Seat DB Driver's Seat
-Seatpost 25.4mm steel micro adjust
-Detangler SST ORYG
-Extras Soft compound brake pads, SST DC Amplifier & ORYG, 2 pegs, owner's manual
Geometry:
Head Tube 74°
Seat Tube 70°
Top Tube 20"
Chain Stay 13.75"
www.diamondbackbmx.com
The Venom is a bike for the mid-sized intermediate level freestyle rider. It's loaded with a lethal dose of value and quality parts; like tubular chromoly 3-piece cranks, Alienation wheels with a cassette hub, and DB Sound pedals - just to name a few. * Chromoly DT frame w/ mid BB * Full chromoly fork w/ U-brake mounts * FSA 1 1/8″ threadless headset * Tektro 907 U-brakes w/ SST DC Amplifier * SST ORYG detangler * Tubular chromoly 3-piece cranks * DB Sound alloy pedals w/ steel traction pins, chromoly axles 
After doing a BMX 'zine for ten years (1987 - 1996) FATBMX made it on the internet. The year was 1998. Here to stay.